BMW e46 325i wheel spacers
About | Information | History | Online | Facts | Discovery
Just put on new wheel spacers they are 20mm
Comments
-
Hey dude looks great what size are ur rims?
-
Thx for video. Ordered 20mm for my e46 too. Cant wait to put them on ;)
-
I parked my trunk in the sun one day in the summer and then took fishing line and wiggled them right off
-
If you ever take a badge off again use a heat gun remember to go back and forth about 6 inches away so you don't burn the paint. Then you should be able to take it off or use a plastic putty knife. As for the rest of the 3m glue just heat it gently and roll off with thumb then take a little alcohol and rob surface clean put a little wax on the area after would because the alcohol strips any polish or wax.
-
Im gonna order mine tomorrow those look wicked!
-
They look cool!! ! know you get air through the kidney grilles for the radiator but you get it where you put your license plate too!
-
Looks good
-
Why order a new badge... ? Use adhesive remover, or a WD40 or anything really.
-
what is your wheel/tire setup? mine is lowered 2" in the front and 1.3" in the back. i have 18x8 with 225/40/18 and want these but idk if they would rub or not
-
You'll notice a MUCH bigger difference if you lower it
-
Couple things that MIGHT work 1. Roll fenders 2. Smaller spacers 3. No spacers That's all I can think of man
-
Alright thanks man I'll keep that in mind
-
TIP ON REMOVING BADGE - when i took off my "352i" badge, I heated the badge up with a blowdryer for about 15 min, then i took dental floss, and shimmied it behind the badge - doing a saw motion until the badge fell off. there will probably be some glue residue left over. using a hot washcloth, and some tlc should take care of it, though! good luck. p.s. don't put the blow dryer too close, for too long. keep a bit of distance.
-
I only put spacers in the back but Idk about 16 cause idk if they will of not but there won't really be a difference if you get 16mm
-
and did you only put spacers on the back? did u put any spacers in the front?
-
would 16mm be good? since the 20mm will rub? I'm putting in spacers for my 325i but i want to get as much info as i can before i order it
-
20 mm will rub so idk its risky man
-
I am thinking of spacers, I have 323i with stock rear suspension and sport front suspension. I have 18x8" with 225/40/18 on Front wheels and 215/40/18 on back wheels. What spacers would give me a more filled in wheel well look? I think 20mm might be too much.
-
I used 20 mm but it made my tires rub with the fender :(
-
Hi how many millimeters hub spacer did you use for this car? Thnx
0m 0sLenght
26Rating